收藏本站
? Verify
Note : This step is necessary. The chip must pass Verification before the
programming can be implemented. Some chips provide only the
accumulation check function, such as VerifyCRC instead of a
unit ‐ to ‐ unit check function. Very few chips do not provide the
accumulation check function.
? Security or Protect if encryption is required
Note : You may need to set the configuration word before performing
encryption. Refer to Device Configuration Word on page 37 for more
information.
Select Auto to finish all the operations in one step.
Execute Production Mode to Program Chips in Batches
Select Production Mode from the Option menu to program devices in large
quantities. This function facilitates the job of the user who programs chips in
batches.
In order to program chips in batches, the programmer always conducts the
insertion test.
The programmer waits for the chip insertion. The system displays the following
prompt: Please, insert a device into the socket . Refer to Insertion Test on page
82 for detailed information on chip insertion error messages.
Once you have properly inserted the chip, the auto batch ‐ processing
command starts automatically.
The programmer waits for the chip removal. When chip programming is complete,
the system displays the following prompt: Please, remove the device from the
socket .
Review the Operation Information window to check the programming result.
Refer to Operation Information Window on page 59 for more information.
To end production mode, select Cancel on the right side of the status bar.
Security and Password Input
To pre vent the user’s data from being used by another, the program asks the user
to input the password in the operation process.
The Set Password screen is illustrated below.
Superpro ? 5000 User’s Guide
70
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
D1U-12-CONC 12V D1U OUTPUT CONNECTOR CARD
D1U-48-CONC 48V D1U OUTPUT CONNECTOR CARD
D1U-52-CONC 52V D1U OUTPUT CONNECTOR CARD
D1U3CS-D-850-12-HC4C DC/DC FRNT END 850W 12V 3.3V AUX
相关代理商/技术参数
CX100A6 制造商:DANAHER SPECIALTY PRODUCTS 功能描述:TIMER, EAGLE SIGNAL, ELECTRONIC REPEAT CYCLE, LCD, 120V, CYCL-FLEX PANEL MT 制造商:Veeder-Root Company 功能描述:ELECTRONIC CYCLE TIMER 制造商:VEEDER ROOT 功能描述:ELECTRONIC CYCLE TIMER; Supply Voltage Range:120V AC; Time Min:0.01s; Time Max:199.9h; Reset Time:30ms; No. of Digits / Alpha:4-1/2; Supply Current:10A; Supply Voltage AC Max:120V; Time Range:0.01sec to 199hr 59min
CX100B6 制造商:Veeder-Root Company 功能描述:
CX100DB BLACK 100M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 100M
CX100DB BLACK 250M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 250M
CX-100H 制造商:Taiyo Electric Ind. 功能描述:
CX-100NUT 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-2C 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-3C 制造商:Taiyo Electric Ind. 功能描述: